<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>Applications Zeal Zone  - Electrician Knowledge</title>
    <link>https://www.appzz.net/forum-13-1.html</link>
    <description>Latest 20 threads of Electrician Knowledge</description>
    <copyright>Copyright(C) Applications Zeal Zone </copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Thu, 07 May 2026 12:36:49 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.appzz.net/static/image/common/logo_88_31.gif</url>
      <title>Applications Zeal Zone </title>
      <link>https://www.appzz.net/</link>
    </image>
    <item>
      <title>Global Electrical Product Certification Standards (IEC, CE, UL, CCC)</title>
      <link>https://www.appzz.net/thread-137-1-1.html</link>
      <description><![CDATA[Industrial Control &amp; PLC Compliance Systems: Standards, Certification, and Engineering SignificanceIn industrial automation systems, compliance is not merely a regulatory requirement — it is a fundamental engineering principle that ensures system re ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Tue, 03 Mar 2026 23:12:56 +0000</pubDate>
    </item>
    <item>
      <title>Self‑Locking, Interlocking, and Safety Interlock Circuit Diagrams</title>
      <link>https://www.appzz.net/thread-136-1-1.html</link>
      <description><![CDATA[First, let’s examine the IEC (International Electrotechnical Commission) standard terminal numbering system for 230 V ±10% AC contactors.FrontTop:A1 A2 1,3,5 (13 NO)Bottom:A2-2 2,4,6 (14NO)When terminals A1 and A2 of the contactor are connected to  ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Mon, 12 May 2025 17:27:21 +0000</pubDate>
    </item>
    <item>
      <title>Practical Techniques to Locate Wire Breaks</title>
      <link>https://www.appzz.net/thread-134-1-1.html</link>
      <description><![CDATA[Detecting Break Points in Frequently Damaged Cables (e.g., water pumps, extension power strips)Set the multimeter to the low AC voltage range.
After powering the cable, slide the probe along the outer surface of the wire insulation.You will notice t ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Mon, 28 Apr 2025 09:51:04 +0000</pubDate>
    </item>
    <item>
      <title>Grounding Resistance Range</title>
      <link>https://www.appzz.net/thread-132-1-1.html</link>
      <description><![CDATA[Common Standard Values for Grounding Resistance
[*]Working grounding (functional grounding): Resistance ≤ 4 Ω
[*]Protective grounding:

[*]≤ 4 Ω (grounded neutral system)
[*]≤ 10 Ω (ungrounded neutral system)
[*]Repeated grounding: Resistance  ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Mon, 28 Apr 2025 05:56:06 +0000</pubDate>
    </item>
    <item>
      <title>30 Essential Electrical Letter Symbols</title>
      <link>https://www.appzz.net/thread-131-1-1.html</link>
      <description><![CDATA[Live wire — LNeutral — NProtective earth — PEAlternating current — ACDirect current — DCNormally open — NONormally closed — NCPush button switch — SBSelector (rotary) switch — SAIsolator switch — QSAC contactor — KMIntermediate relay  ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Sun, 27 Apr 2025 12:05:13 +0000</pubDate>
    </item>
    <item>
      <title>Why didn’t the circuit breaker trip when a hazard occurred in the electrical ca</title>
      <link>https://www.appzz.net/thread-129-1-1.html</link>
      <description><![CDATA[Most incidents are caused by an oversized circuit breaker combined with undersized conductors.]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 25 Apr 2025 08:41:50 +0000</pubDate>
    </item>
    <item>
      <title>Why Measurements of Soldered Components on a PCB Are Inaccurate</title>
      <link>https://www.appzz.net/thread-128-1-1.html</link>
      <description><![CDATA[Measuring an electronic component while it is still soldered onto the circuit board (in-circuit measurement) is only for reference, because other components connected in the circuit will affect the reading.For example, if several capacitors are conne ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 25 Apr 2025 08:32:35 +0000</pubDate>
    </item>
    <item>
      <title>Why the Neutral Wire Sometimes Has Voltage and Sometimes Doesn’t</title>
      <link>https://www.appzz.net/thread-127-1-1.html</link>
      <description><![CDATA[Under normal conditions, the neutral wire will not give an electric shock.In reality, current does flow through the neutral wire.
However, when you test the neutral with a voltage tester screwdriver, the tester will not light up.This is because the s ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 25 Apr 2025 08:22:58 +0000</pubDate>
    </item>
    <item>
      <title>Detailed Wiring Guide for Three-Phase Meter Current Transformers</title>
      <link>https://www.appzz.net/thread-126-1-1.html</link>
      <description><![CDATA[三相四线制带互感器的电表，如何接线
首先第一步
要先从断路器引出a b c三相火线
分别从这三个互感器的P1面穿入
然后连接到负载
第二步将这三个互感器的S1端
分别接到电表的147
互感器的S2
分别接电表的369端子
电表上标有258的接线端口
分别接上三根火线和工作电压线
 ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 25 Apr 2025 08:06:45 +0000</pubDate>
    </item>
    <item>
      <title>电工小知识:10道难题详细解答</title>
      <link>https://www.appzz.net/thread-124-1-1.html</link>
      <description><![CDATA[10道题
第一个
是电动机的星角启动的电流大
为什么变频器总是出现错误报警
像过载报警等等
报警都错误
这个电流还没有超标
一句话解答
就是那个输出电缆线过长
容易出现干扰
造成了这种现象
这个照明电路
出现漏电
频繁跳闸
线路绝缘不合格
就会造成这样有漏电的现象
直 ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 25 Apr 2025 06:56:59 +0000</pubDate>
    </item>
    <item>
      <title>Electrical Safety Tips</title>
      <link>https://www.appzz.net/thread-123-1-1.html</link>
      <description><![CDATA[Touching electricity with wet hands is more than 10 times more dangerous than with dry hands.Induced voltage and ghost voltage can also light up a test screwdriver; always verify with a multimeter.If the live and neutral wires are reversed in a scre ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 25 Apr 2025 05:45:59 +0000</pubDate>
    </item>
    <item>
      <title>Detailed Explanation of Ground (GND) Usage in Different Environments</title>
      <link>https://www.appzz.net/thread-122-1-1.html</link>
      <description><![CDATA[There are several types of GND, each with specific functions and connection requirements.Analog GND (AGND)
Used in analog circuits to provide a stable reference ground and reduce interference between analog signals.
Digital GND (DGND)
Connected to di .]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Thu, 24 Apr 2025 10:58:43 +0000</pubDate>
    </item>
    <item>
      <title>Electrical Tips: Methods for Detecting Live Neutral Wires</title>
      <link>https://www.appzz.net/thread-121-1-1.html</link>
      <description><![CDATA[为什么当零线带电
我们就能判定是零线断了呢
当零线断开了之后
零线和火线之间就行不成一个回路
那这段零线它就没有了电流通过
同时呢也不会有压降
这个时候
量断点之前的这段零线的时候
它其实就带电了
而且它的电压也是220伏左右
那么这个时候我们就可以判定
当零线带 ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Thu, 24 Apr 2025 10:25:43 +0000</pubDate>
    </item>
    <item>
      <title>Detailed Explanation of Digital, Analog, and Pulse Signals</title>
      <link>https://www.appzz.net/thread-120-1-1.html</link>
      <description><![CDATA[Digital signals, analog signals, and pulse signals are three very common types of signals used in automation systems.[hr]1. Digital Signals (Discrete / Switching Signals)Digital signals (also called switching signals) have only two possible states:
[ ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Thu, 24 Apr 2025 10:06:22 +0000</pubDate>
    </item>
    <item>
      <title>Detailed Explanation of Open Circuit, Short Circuit, and Leakage Current</title>
      <link>https://www.appzz.net/thread-119-1-1.html</link>
      <description><![CDATA[1. Open CircuitAn open circuit occurs when a conductor is broken and the current path is interrupted.
In simple terms, the wire is disconnected, so current cannot flow and the load stops working.[hr]2. Short CircuitA short circuit occurs when the liv ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Thu, 24 Apr 2025 07:30:28 +0000</pubDate>
    </item>
    <item>
      <title>使用变频器(transducer)获得三相220V电压</title>
      <link>https://www.appzz.net/thread-118-1-1.html</link>
      <description><![CDATA[如何能够获得三项220电伏的电压
大家知道这个380的三相很常见
接下来就是三项380 如何获得三相220V电压
因为我们常用一些设备
大量的设备 使用三相的220伏电源
使用变频器，380的电变成220的电，虽然是三相变过来之后呢，变频器是把两相的220，变成了三项的220
第二个优 ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Thu, 24 Apr 2025 06:03:34 +0000</pubDate>
    </item>
    <item>
      <title>Electrical Tool: How to Use a Megger (Insulation Resistance Tester)</title>
      <link>https://www.appzz.net/thread-117-1-1.html</link>
      <description><![CDATA[A Megger produces high voltage and very low current, so safety is important.
Never touch both test terminals with your hands during operation.[hr]1. Checking Whether the Megger Works ProperlyStep 1 – Open-circuit testConnect the Megger leads to a mu ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Wed, 23 Apr 2025 18:09:54 +0000</pubDate>
    </item>
    <item>
      <title>Working Principle of the Intermediate Relay</title>
      <link>https://www.appzz.net/thread-116-1-1.html</link>
      <description><![CDATA[AC and DC Intermediate Relays — Principle, Usage, and ApplicationsAn intermediate relay is an electrical switching device widely used in control circuits.
Its main purpose is to use a low-current control signal to switch or control higher-power elec ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 18 Apr 2025 15:35:52 +0000</pubDate>
    </item>
    <item>
      <title>Electrical Failures Caused by Voltage Fluctuation</title>
      <link>https://www.appzz.net/thread-115-1-1.html</link>
      <description><![CDATA[Today I encountered a strange problem while using my computer and spent quite a long time troubleshooting before finally solving it.[hr]The IncidentAt home I plugged my electric scooter charger into the same power strip as my computer.
After a while  ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Mon, 14 Apr 2025 19:42:49 +0000</pubDate>
    </item>
    <item>
      <title>Low-Voltage Distribution Electrical Equipment - Low-Voltage Circuit Breakers</title>
      <link>https://www.appzz.net/thread-114-1-1.html</link>
      <description><![CDATA[低压断路器又称自动空气开关或自动空气断路器，它相当于把手动开关，隔离开关，热脱扣器，电磁脱扣器等组合在一起构成的一种电器元件。当电路中发生短路、过载和失压等故障时，能自动切断故障电路，保护线路和电气设备，也可用于不频繁启动电动机。断路器装有灭弧装置， ...]]></description>
      <category>Electrician Knowledge</category>
      <author>APPZZ</author>
      <pubDate>Fri, 04 Apr 2025 11:53:08 +0000</pubDate>
    </item>
  </channel>
</rss>